др Марко Пантић

1. M. Pantić, S. Jovanović, A. Djordjevic, S. Petrović Savić, M. Radenković, Ž. Šarkoćević, Predicting Wear Rate and Friction Coefficient of Li2Si2O5 Dental Ceramic Using Optimized Artificial Neural Networks. Applied Sciences, vol. 15, no. 4, p. 1789, 2025, doi:10.3390/app15041789, ISSN: 2076-3417 [М21]
2. P. Mitić, V. Kočović, M. Mišić, M. Stefanović, A. Đorđević, M. Pantić, D. Projović, A novel approach in 3D model reconstruction from engineering drawings based on symmetric adjacency matrices using dxf files and genetic algorithm, Symmetry, vol. 17, no.5, p. 771, 2025, doi: 10.3390/sym17050771, ISSN: 2073-8994 [М21]
3. S. Petrović Savić, А. Mitrović, A Djordjević, M. Pantić, M. Ivković, A. Jovičić, J. Baralić, Morphological segmentation of wear zones on cutting inserts for tool condition monitoring, Advances in Mechanical Engineering, vol. 17, no. 10, p. 12, 2025, doi:10.1177/16878132251388275, ISSN: 1687-8132 [M22]
4. A. Đorđević, M. Pantic, S. Petrović Savić, D. Džunić, V. Kočović, M. Stefanović, Defining a Software Solution Requirements for Document Management in Public Enterprises: A Methodology of Organizations Reframing into Quality - Smart Public Enterprises. International Journal for Quality Research, vol. 19, no. 3, pp. 335-353, 2025, doi:10.24874/IJQR19.03-01, ISSN: 1800-6450 [M23]
5. M. Babić, B. Stojanović, D. Džunić, M. Pantić, “Micro/nanoscale structural, mechanical and tribological characterization of ZA-27/SiC nanocomposites”, Journal of Composite Materials, vol. 54, pp. 2113-2129, doi: 10.1177/0021998319891766, ISSN: 0021-9983, 2020. [M22]
6. S. Mitrović, D. Adamović, F. Živić, D. Džunić, M. Pantić, D. Jevremović: “Dry Sliding Wear Behavior of PVD TiN Coatings for Cold Forming Tools”, Journal of Balkan tribological association, Vol. 22, No. 1, pp. 347-355, ISSN 1310-4772, 2016. [M22]
7. S. Mitrović, D. Adamović, F. Živić, D. Džunić, M. Pantić: “Friction and wear behaviour of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions”, Applied Surface Science, Vol. 290, pp. 223-232, ISSN 0169-4332, doi: 10.1016/j.apsusc.2013.11.050, 2014. [M21а]
8. Đ. Vukelić, D. Miljanić, S. Ranđelović, I. Budak, D. Džunić, M. Erić, M. Pantić: “A Burnishing Process Based on the Optimal Depth of Workpiece Penetration”, Materials and technology, Vol.47, No.1, pp. 43–51, ISSN 1580-2949, 2013. [M22]
9. B. Jeremić, Đ. Vukelić, P. Todorović, I. Mačužić, M. Pantić, D. Džunić, B. Tadić: “Static Friction at High Contact Temperatures and Low Contact Pressure”, Journal of Friction and Wear, Vol. 34, No. 2, pp. 114-119, doi: 10.3103/S1068366613020037, ISSN 1068-3666, 2013. [M23]
10. B. Stojanović, M. Babić, S. Mitrović, A. Vencl, N. Miloradović, M. Pantić: “Tribological Characteristics of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Graphite. A Review”, Journal of the Balkan Tribological Association, Vol.19, No.1, pp. 83-96, ISSN 1310-4772, 2013. [M23]
11. M. Babić, D. Adamović, S. Mitrović, F. Živić, D. Džunić, M. Pantić: “Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition”, Journal of the Balkan Tribological Association, Vol.18, No.4, pp.566-576, ISSN 1310-4772, 2012. [M23]
12. S. Mitrović, M. Babic, F. Zivic, I. Bobic, D. Dzunic, M. Pantic: “Influence of Al2O3 Particle Content on the Sliding Wear Behaviour of ZA-27 Alloy Composites”, Journal of the Balkan Tribological Association, Vol.18, No.4, pp. 548-558 , ISSN 1310-4772, 2012. [M23]
13. F. Živić, M. Babić, D. Adamović, S. Mitrović, P. Todorović, G. Favaro, M. Pantić: "Influence of the Surface Roughness on Adhesion of Chrome Coatings on Alloy Tool Steel X165CrMoV12", Journal of the Balkan Tribological Association, Vol.18, No.2, pp. 228–237, ISSN 1310-4772, 2012. [M23]

1. A. Djordjevic, M. Pantic, S. Petrovic Savic, D. Dzunic, M. Eric, M. Stefanovic, Real-Time Nonconformity Management in SMEs Within the Internet of Things and Industry 4.0 Concepts. International Journal of Strategy and Organisational Learning. Vol. 1, No. 1, pp. 57-68, ISSN 2998-7229, doi: 10.56830/IJSOL06202404, 2024. [M51]
2. M. Pantić, A. Đorđević, M. Erić, S. Mitrović, M. Babić, D. Džunić, M. Stefanović, “Application of Artificial Neural Network in Biotribological Research of Dental Glass Ceramic”, Tribology in Industry, Vol. 40, No. 4, pp. 692-701, ISSN 0354-8996, doi: 10.24874/ti.2018.40.04.15, 2018. [M24]
3. M. Pantić, S. Mitrović, M. Babić, D. Jevremović, T. Kanjevac, D. Džunić, D. Adamović, “AFM Surface Roughness and Topography Analysis of Lithium Disilicate Glass Ceramic”, Tribology in Industry, Vol.37, No.4, pp. 391-399, ISSN 0354-8996, 2015. [M24]
4. D. Džunić, S. Mitrović, M. Babić, I. Bobić, M. Pantić, D. Adamović, B. Nedeljković, “Nanoindentation of Za-27 Alloy Based Nanocomposites Reinforced with Al2O3 Particles”, Tribology in Industry, Vol.37, No.4, pp. 413-420, ISSN 0354-8996, 2015. [M24]
5. S. Mitrović, M. Babić, N. Miloradović, I. Bobić, B. Stojanović, D. Džunić, M. Pantić: “Wear Characteristics of Hybrid Composites Based on ZA27 Alloy Reinforced With Silicon Carbide and Graphite Particles”, Tribology in Industry, Vol.36, No.2, pp. 204-210, ISSN 0354-8996, 2014. [M24]
6. M. Babić, B. Stojanović, S. Mitrović, I. Bobić, N. Miloradović, M. Pantić, D. Džunić: “Wear Properties of A356/10SiC/1Gr Hybrid Composites in Lubricated Sliding Conditions”, Tribology in Industry, Vol.35, No.2, pp. 148-154, ISSN 0354-8996, 2013. [M24]
7. S. Mitrović, M. Babić, B. Stojanović, N. Miloradović, M. Pantić, D. Džunić: “Tribological Potential of Hybrid Composites Based on Zinc and Aluminium Alloys Reinforced with SiC and Graphite Particles”, Tribology in Industry, Vol.34, No.4, pp. 177-185, ISSN 0354-8996, 2012. [M24]
8. S. Mitrović, M. Babić, D. Adamović, F. Živić, D. Džunić, M. Pantić: “Wear Behaviour of Hard Cr Coatings for Cold Forming Tools Under Dry Sliding Conditions”, Tribology in Industry, Vol.34, No.1, pp. 44-48, ISSN 0354-8996, 2012. [M24]
9. M. Erić, S. Mitrović, M. Babić, F. Živić, M. Pantić: “Application of Contemporary Information Technologies in Nanotribometry”, Tribology in Industry, Vol.33, No.4, pp. 159-163, ISSN 0354-8996, 2011. [M24]
10. M. Pantić, M. Babić, S. Mitrović, D. Jevremović, D. Džunić, T. Kanjevac, I. Luković, “Effects of Different Finishing Procedure onto Nanomechanical Characteristics of Fluorapatite Veneering Ceramic“, Tribological Journal BULTRIB, Vol. 7, pp. 79-85, ISSN 1313-9878, 2018. [M51]
11. D. Džunić, S. Mitrović, M. Babić, M. Pantić, I. Bobić, “Tribological behaviour ZA-27 alloy based nanocomposite reinforced with SiC nanoparticles”, Tribological Journal BULTRIB, Vol. 7, pp. 86-92, ISSN 1313-9878, 2018. [M51]
12. M. Pantić, S. Mitrović, M. Babić, D. Jevremović, D. Džunić, T. Kanjevac, D. Adamović, “Effects of Different Finishing Procedure onto Nanomechanical and Nanotribological Characteristics of Lithium Disilicate Glass Ceramics”, Tribological Journal BULTRIB, Vol. 6, pp. 137-146, ISSN 1313-9878, 2016. [M51]
13. D. Džunić, S. Mitrović, M. Babić, M. Pantić, I. Bobić, “Tribological Behavior of Za-27 Alloy Based Nanocomposite Reinforced with SiC Nanoparticles”, Tribological Journal BULTRIB, Vol. 6, pp. 147-153, ISSN 1313-9878, 2016. [M51]
14. M. Babić, B. Stojanović, S. Mitrović, I. Bobić, N. Miloradović, M. Pantić, “THE INFLUENCE OF LUBRICANT ON FRICTION COEFFICIENT OF HYBRID AL-SIC-GR COMPOSITES”, Tribological Journal BULTRIB, Vol.3, pp. 148-154, ISSN 1313-9878, 2013. [M51]
15. S. Mitrović, M. Babić, D. Adamović, F. Živić, D. Džunić, M. Pantić, “WEAR AND FRICTION PROPERTIES OF SHOT PEENED SURFACES OF 36CRNIMO4 AND 36NICRMO16 ALLOYED STEELS UNDER DRY AND LUBRICATED CONTACT CONDITIONS”, Tribological Journal BULTRIB, Vol.3, pp. 155-169, ISSN 1313-9878, 2013. [M51]

1. S. Petrovic Savic, M. Zivanovic, M. Pantic, D. Dzunic, V. Kocovic, Z. Jovanovic Pesic, A. Djordjevic: Functional analysis of surface roughness, 19th International Conference on tribology SerbiaTrib '25, Kragujevac, Serbia, May 14-16, 2025, pp. 432-438, ISBN 978-86-6335-128-8, DOI 10.24874/ST.25.173. [M33]

2. M. Eric, M. Stefanovic, S. Mitrovic, D. Dzunic, V. Kocovic, Z. Jovanovic Pesic, Savic Petrovic, A. Djordjevic, M. Pantic: Possibilities Of Applying Artificial Intelligence In The Field Of Tribological Research, 19th International Conference on tribology SerbiaTrib '25, Kragujevac, Serbia, May 14-16 , 2025, pp. 598-608, ISBN 978-86-6335-128-8, DOI 10.24874/ST.25.198 [M33]
3. M. Pantic; S. Mitrovic; A. Djordjevic; S. Petrovic Savic; Z. Sarkocevic; D. Lazarevic; M. Matejic, Influence of different finishing techniques onto nanotribological characteristics of veneering glass ceramic, 18th International Conference on Tribology - SERBIATRIB '23, Kragujevac, Serbia, 17 – 19 May 2023, pp. 703-710, ISBN 978-86-6335-103-5. [M33]
4. S. Petrovic Savic; V. Kocovic; D. Dzunic; M. Pantic; S. Kostic; S. Milojevic; T. Prodanovic, Surface characterisation using image processing, 18th International Conference on Tribology - SERBIATRIB '23, Kragujevac, Serbia, 2023, 17 – 19 May 2023, pp. 737-742, ISBN 978-86-6335-103-5. [M33]
5. Matejic, M. Matejic, J. Zivic, J. Skerlic, D. Lazarevic, M. Pantic, THE EXPERIMENTAL INVESTIGATION OF FRICTION OCCURRENCE IN GRINDING PROCESS WITH ABRASIVE BELTS. 18th International Conference on Trobology – SERBIATRIB `23, 17 – 19 May 2023. [M33]
6. Djordjevic, D. Dzunic, M. Pantic, M. Eric, S. Mitrovic, M. Stefanovic, SELECTION OF MACHINE LEARNING ALGORITHMS FOR NANOCOMPOSITE ZA-27 MATERIAL TRANSFER PREDICTION. 18th International Conference on Tribology - SERBIATRIB '23, Kragujevac, Serbia, 2023, 17 – 19 May 2023, pp. 717-726, ISBN 978-86-6335-103-5. [M33]
7. Radojevic, I. Popovic, M. Matejic, M. Pantic, J. Skerlic, Fulfilling Internal Needs for Electric Energy using Solar Panels on Public Buildings. XII International Conference on Social and Technological Development , 2023. [M33]
8. Popovic, M. Djordjevic, M. Matejic, M. Pantic, J. Skerlic, LOW-CARBON URBAN DEVELOPMENT INTEGRATION - DECARBONIZATION OF CITIES - A REVIEW. XII International Conference on Social and Technological Development , 2023. [M33]
9. Skerlic, D. Nikolic, J. Radulovic, A. Miskovic, M. Pantic, MAXIMIZING PERFORMANCES OF A SOLAR DOMESTIC HOT WATER SYSTEM THROUGH OPTIMUM POSITION OF THE SOLAR COLLECTOR IN SERBIAN HOUSEHOLDS. Proceedings of short papers, Volume 5 / Sixth International Scientific Conference Alternative Energy Sources, Materials and Technologies, Sofia, Bulgaria, 16 - 17 May 2023, pp. 23-24, ISSN 2603-364X, 2023. [M33]
10. D. Nikolić, J. Radulović, J. Skerlić, A. Radojević, A. Mišković, M. Pantić, “Application of renewable energy sources in greenhouses”, 5th International Scientific Conference Alternative Energy Sources, Materials & Technologies (AESMT’22), Veliko Trnovo, Bulgaria, 27 – 28 June, p. 17, ISSN 2603-364X, 2022. [M33]
11. A. Kokic Arsic, M. Pantic, M. Radojkovic, D. Dzunic, “THE APPLICATION OF 8D METHODOLOGY AS A RECOMMENDATION OF VDA STANDARD”, 13th DQM International Conference (DQM-POLYTECH-2022), Prijevor, Serbia, 23-24 June, 2022, ISBN 978-86-86355-48-5. [M33]
12. D. Džunić, S. Mitrović, D. Pešić, V. Kočović, M. Pantić, A. Kokić Arsić, “Tribological investigation of ZA-27 alloy based micro/nano mixed composites”, 10th International Conference on Tribology - BALKANTRIB '20, Belgrade, Serbia, May 20 – 22, 2021, pp. 19-20, ISBN 978-86-6060-072-3. [M33]
13. A. Đorđević, M. Pantić, D. Džunić, S. Mitrović, M. Erić, M. Stefanović, A. Kokić Arsić, “Software development solution for prediction on tribological properties of dental glass ceramics based on JavaScript web frameworks”, 10th International Conference on Tribology - BALKANTRIB '20, Belgrade, Serbia, May 20 – 22, 2021, pp. 209-210, ISBN 978-86-6060-072-3. [M33]
14. M. Matejić, M. Pantić, M. Blagojević, “COMPARATIVE ANALYSIS BETWEEN CPQ SYSTEMS”, 5th International Scientific Conference COMETa 2020, Jahorina, Republic of Srpska, B&H, 26 – 28 November 2020, 267-273, ISBN: 978-99976-719-8-1. [M33]
15. A. Kokić Arsić, M. Pantić, M. Radojković, D. Džunić, “Fire risk assessment methodologies”, 11th DQM International Conference ICDQM-2020, Prijevor, Serbia, 25 – 26 June 2020, 169-173, ISBN: 978-86-86355-42-3. [M33]
16. S. Veličković, B. Stojanović, A. Vencl, M. Babić, D. Džunić, M. Pantić, V. Šljivić, “Tribological behaviour of A356/SiC nanocomposite”, 16th International Conference on Tribology - SERBIATRIB '19, Kragujevac, Serbia, 15 – 17 May 2019, pp. 115-123. [M33]
17. D. Džunić, M. Pantić, S. Mitrović, M. Babić, S. Petrović Savić, A. Đorđević, A. Kokić Arsić, “Assessment of tribological behaviour of ZA-27 ZINC-Aluminium alloy based nanocomposite”, 16th International Conference on Tribology - SERBIATRIB '19, Kragujevac, Serbia, 15 – 17 May 2019, pp. 145-153. [M33]
18. A. Đorđević, M. Erić, M. Stefanović, S. Mitrović, M. Pantić, A. Kokić Arsić, D. Džunić, “Predicting cutting parameters by applying developed neural network and liner regression models”, 16th International Conference on Tribology - SERBIATRIB '19, Kragujevac, Serbia, 15 – 17 May 2019, pp. 482-489. [M33]
19. M. Pantić, D. Džunić, M. Babić, S. Mitrović, S. Petrović Savić, A. Đorđević, A. Kokić Arsić, “Nanoidentation of Zirconium dental ceramic prepared with different finishing techniques”, 16th International Conference on Tribology - SERBIATRIB '19, Kragujevac, Serbia, 15 – 17 May 2019, pp. 706-714. [M33]
20. D. Džunić, V. Kočović, I. Bijelić, M. Pantić, S. Petrović Savić, S. Mitrović, “Analysis of Ball Burnishing Influence on Tribomechanical Properties of Aluminum”, 37th International Conference on Production Engineering of Serbia, ICPE-S 2018, Kragujevac, Serbia, 25 – 26 October 2018, pp. 75-80, ISBN: 978-86-6335-057-1. [M33]
21. S. Petrovic Savic, M. Pantic, D. Dzunic, V. Kocovic, “3D Modeling Process Automatization Through Macros Implementation”, 37th International Conference on Production Engineering of Serbia, ICPE-S 2018, Kragujevac, Serbia, 25 – 26 October 2018, pp. 269-273, ISBN: 978-86-6335-057-1. [M33]
22. M. Pantić, S. Mitrović, M. Babić, D. Džunić, D. Jevremović, A. Jevremović, T. Kanjevac, “In vivo study of the nanomechanical properties of leuci te glass ceramic prepared with different surface finishing procedure”, ETIKUM 2017, Scientific conference with international participation, Novi Sad, Serbia, 2017, 6-8 December, pp. 121-124, ISBN 978-86-6022-00-68. [M33]
23. D. Džunić, M. Babić, S. Mitrović, M. Pantić, I. Bobić, “Micro Scratch Test Characterisation of ZA-27/SiC Nanocomposites”, 15th International Conference on Tribology, Serbiatrib '17, Kragujevac, Serbia, 17 – 19 May 2017, pp. 75-83, ISBN 978-86-6335-041-0. [M33]
24. D. Adamović, M. Živković, T. Vujinović, F. Živić, M. Topalović, M. Pantić, “Wear of the Tools for the Ironing Process and Methods for Increasing their Lifetime”, 15th International Conference on Tribology, Serbiatrib '17, Kragujevac, Serbia, 17 – 19 May 2017, pp. 408-416, ISBN 978-86-6335-041-0. [M33]
25. A. Đorđević, M. Erić, M. Pantić, D. Džunić, M. Stefanović, S. Mitrović, “Possibilities of Artificial Neural Network Application in Biotribological Research”, 15th International Conference on Tribology, Serbiatrib '17, Kragujevac, Serbia, 17 – 19 May 2017, pp. 589-599, ISBN 978-86-6335-041-0. [M33]
26. M. Pantić, S. Mitrović, M. Babić, D. Jevremović, T. Kanjevac, D. Džunić, D. Adamović, “Micro Scratch behaviour of Lithium Disilicate Glass Ceramic after Glazing Treatment”, 15th International Conference on Tribology, Serbiatrib '17, Kragujevac, Serbia, 17 – 19 May 2017, pp. 645-651, ISBN 978-86-6335-041-0. [M33]
27. M. Pantić, S. Mitrović, M. Babić, D. Jevremović, D. Džunić, F. Živić, D. Adamović, “AFM Surface Roughness and Topography Analysis of Lithium Disilicate Glass Ceramic”, 14th International Conference on Tribology, Serbiatrib '15, Belgrade, Serbia, 13 – 15 May 2015, pp. 514-521, ISBN 978-86-7083-857-4. [M33]
28. D. Džunić, S. Mitrović, M. Babić, I. Bobić, M. Pantić, D. Adamović, B. Nedeljković, “Nanoindentation of ZA27 Alloy Based Nanocomposites Reinforced with Al2O3 Particles”, 14th International Conference on Tribology, Serbiatrib '15, Belgrade, Serbia, 13 – 15 May 2015, pp. 73-80, ISBN 978-86-7083-857-4. [M33]
29. D. Milosavljević, G. Bogdanović, M. Pantić: “Role of the Universities in Technology Transfer in Serbia”, ICTT 2013, 2013 International Conference on Technology Transfer, Niš, Serbia, 20-21 June 2013, pp 155-160, ISBN 978-86-6125-083-5. [M33]
30. M. Babić, B. Stojanović, S. Mitrović, I. Bobić, N. Miloradović, M. Pantić, D. Džunić, “Wear Properties of A356/10SiC/1Gr Hybrid Composites in Lubricated Sliding Conditions”, 13th International Conference on Tribology, Serbiatrib '13, Kragujevac, 2013, 15-17 May, pp. 129-134, ISBN 978-86-86663-98-6. [M33]
31. S. Mitrović, M. Babić, I. Bobić, F. Živić, D. Džunić, M. Pantić, “Wear Behaviour of Composites Based on Za27 Alloy Reinforced with Graphite Particles”, 13th International Conference on Tribology, Serbiatrib '13, Kragujevac, 2013, 15-17 May, pp. 124-128, ISBN 978-86-86663-98-6. [M33]
32. M. Erić, S. Mitrović, F. Živić, M. Pantić: “Application of Contemporary Information Technologies in Nanotribometry”, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, Serbia, 11-13 May 2011, pp 392-396, ISBN 978-86-86663-74-0. [M33]
33. M. Babić, D. Adamović, S. Mitrović, F. Živić, D. Džunić, M. Pantić: “Tribological Properties of Shot Peened Surfaces of 36NiCrMo16 Alloyed Steels in Dry Sliding Condition”, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, Serbia, 11-13 May 2011, pp 168-173, ISBN 978-86-86663-74-0. [M33]
34. S. Mitrović, M. Babić, D. Adamović, F. Živić, D. Džunić, M. Pantić: “Wear Behaviour of TiN Coatings for Cold Forming Tools under Dry Sliding Conditions”, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, Serbia, 11-13 May 2011, pp 174-180, ISBN 978-86-86663-74-0. [M33]
35. S. Mitrović, M. Babić, F. Živić, D. Džunić, M. Pantić: “Wear Behaviour of Cr Hard Coatings for Cold Forming Tools Under Dry Sliding Conditions”, 34th International Conference on Production Engineering, Niš, Serbia, 28-30 September 2011, pp 519-522, ISBN 978-86-6055-019-6. [M33]
36. M. Babić, D. Adamović, S. Mitrović, F. Živić, D. Džunić, M. Pantić: “Wear Properties of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition”, 7th BalkanTrib International Conference, Thessaloniki, Greece, 3-5 October 2011, pp 69-76, ISBN 978-980-98780-6-7. [M33]
37. F. Živić, M. Babić, D. Adamović, S. Mitrović, G. Favaro, M. Pantić: “Influence of the Surface Roughness on Adhesion of Chrome Coatings on Alloy Tool Steel 165CrMoV12”, 9th International Conference COATINGS, Thessaloniki, Greece, 3-5 October 2011, pp 389-396, ISBN 978-980-98780-5-0. [M33]

/

1. M. Pantić, “Advanced Dental Ceramics”, In: Dermot Brabazon (Editor-in-Chief) Encyclopedia of Materials: Composites, Volume 2, 2021, pp. 366-377, Elsevier, doi: 10.1016/B978-0-12-819724-
   0.00072-0, ISBN 978-0-12-819731-8, 2021.

1. Технолошки развој ТР 35021, "Развој триболошких микро/нано двокомпонентних и хибридних самоподмазујућих композита";, Факултет инжењерских наука Универзитета у Крагујевцу, руководилац проф. др Мирослав Бабић, 2011-2019.

1. TEMPUS PROJECT, "Virtual Manufacturing Network - Fostering an Integration of the Knowledge Triangle, 144684-TEMPUS-2008-RS-JPHES";, руководилац проф. др Весна Мандић, Универзитет у Крагујевцу, www.wbc-vmnet.kg.ac.rс
2. TEMPUS PROJECT, "National Platform for Knowledge Triangle in Serbia (KNOWTS)";, JP 158881- 2009, руководилац проф. др Мирослав Бабић, Универзитет у Крагујевцу, www.knowts.elfak.ni.ac.rs
3. TEMPUS PROJECT, "Development of Sustainable Interrelations between Education, Research and Innovation at WBC Universities in Nanotechnologies and Advanced Materials where Innovation Means Business (WIMB), 543898-TEMPUS-1-2013-1-ES-TEMPUS-JPHES";, руководилац проф. др Ненад Грујовић, Универзитет у Крагујевцу, www.wimb.fink.rs