Књаза Милоша бр. 7, 38220 Косовска Митровица, Србија
+38128425321
office@ftn.pr.ac.rs

др Марија Матејић

др Марија Матејић

ванредни професор
+381 28 425 320
ул. Књаза Милоша бр. 7, 38220 Косовска Митровица
Катедра Катедра за производно машинство

Стручни назив

Доктор наука – машинско инжењерство

Ужа научна област

Производно машинство и индустријски инжењеринг

Датум избора у звање

1.9.2019. године.

Предмети које наставник држи на основним, мастер и докторским студијама (по акредитацији из 2021. године)

Технологија малосеријске производње

Сензори и актуатори у мехатроници

Аутоматизација производње

Механика флуида

Аутоматизација произ. процеса или

Аутоматске линије

Пумпе, вентилатори и компресори

Одржавање средстава рада

Аутоматско управљање

Радови у часописима са SCI листе
  1. Р. Todorović, В. Tadić, Dj. Vukelić, М. Jeremić, S. Randjelović, R. Nikolić, Analysis of the influence of loading and the plasticity index on variations in surface roughness between two flat surfaces, Tribology Intemational, Vol.81, No.1, рр. 276-282, ISSN: 0301-679X, https://doi.org/10.1016/j.triboint.2014.09.012, 2015. (IF=2,259 за 2015. годину; ранг часописа у области 22/132; област: Engineering, Mechanical, https://doi.org/10.1016/j.triboint.2014.09.012) М21
  2. M. Matejić, B. Tadić, M. Lazarević, M. Misić, D. Vukelić, Мodelling and simulation of a novel modular fixture for a flexible manufacturing system, International Journal of Simulation Modelling, Vol. 17, No. 1, pp. 18-29, ISSN 1726-4529, https://doi.org/10.2507/IJSIMM17(1)407, 2018. (IF=1,942 за 2017. годину; ранг часописа у области 25/47; област: Engineering, Manufacturing,) М22
  3. M. Matejic, M. Blagojevic, A. Disic, M. Matejic, V. Milovanovic, I. Miletic: A Dynamic Analysis of the Cycloid Disc Stress-Strain State, Applied Sciences, Vol. 13, No. 7, pp. 4390, ISSN: 2076-3417, https://doi.org/10.3390/app13074390, 2023. (IF= 2.9 за 2023. годину, ранг часописа у области 39/91; област: Engineering, Multidisciplinary) М22
  1. Todorović, M. Blagojević, Dj. Vukelić, I. Mačuzić, M. Jeremić, A. Simić, B. Jeremić, Static coefficient of rolling friction under heating, Journal of friction and wear, Vol.34, No.6, pp. 450-453, ISSN 1068 – 3666, https://doi.org/10.3103/S1068366613060123, 2013. (IF=0,336 за 2013. годину; ранг часописа у области 111/128; област: Engineering, Mechanical) М23
  2. Tadic, M. Matejic, G. Simunovic, M. Kljajin, V. Kocovic, B. Bogdanovic, D. Vukelic: Increasing Stiffness of Constructions through Application of Enhancing Elements, Tehnicki vjesnik - Technical Gazette, Vol. 25, No 2, pp. 479-485, ISSN 1330-3651, https://doi.org/10.17559/TV-20171229212528 , 2018. (IF=0,698 за 2017. годину; ранг часописа у области 70/86; област: Engineering, Multidisciplinary) М23
  3. M. Matejic, M. Blagojevic, M. Matejic: Dynamic behaviour of a planetary reducer with double planet gears, Mechanical Science, Vol. 12, No. 2, pp. 997-1003, eISSN: 2191-916X, https://doi.org/10.5194/ms-12-997-2021 , 2021. (IF=1.41 за 2021. годину; ранг часописа у области 117/137; област: Engineering, Mechanical) М23

Радови у часописима ван SCI листе
  1. Todorović, M. Blagojević, M. Jeremić, A. Stanković, A. Marković, B. Trifunović, M. Miljković, The impact of one heat treated contact element on the coefficient of static friction, Tribology in Industry, Vol. 35, No. 4, pp. 345-350, ISSN 0354-8996, 2013.http://www.tribology.fink.rs/journals/2013/2013-4/11.pdf M24
  2. Jeremić, M. Matejić, B. Bogdanović, B. Tadić, D. Miloradović, D. Miljanić, Analyzing the Influence of the Construction Element Position on Torque Transmission by Friction, Tribology in Industry, Vol.36, No.3, pp. 300-307, ISSN 0354-8996, 2014. http://www.tribology.fink.rs/journals/2014/2014-3/9.pdf M24
  3. Živković , M. Matejić, D. Miljanić , Lj. Brzaković , V. Kočović, Influence of the Previous Preheating Temperature on the Static Coefficient of Friction with Lubrication, Tribology in Industry, Vol.38, No.4, pp. 585-589, ISSN 0354-8996, 2016. http://www.tribology.fink.rs/journals/2016/2016-4/15.pdf M24
  4. Tadić, V. Kočović, M. Matejić, Lj. Brzaković, M. Mijatović, Đ. Vukelić, Static Coefficient of Rolling Friction at High Contact Temperatures and Various Contact Pressure, Tribology in Industry, Vol.38, No.1, pp. 83-89, ISSN 0354-8996, 2016. https://www.tribology.rs/journals/2016/2016-1/9.pdf M24
  5. Matejić, M. Matejić, M. Milicević, L. Ivanović, A new concept of bicycle frame design, Machine Design, Vol.9, No.1, pp. 19-22, ISSN 1821-1259, 2017. http://www.mdesign.ftn.uns.ac.rs/download/v9n1/p3.pdf M51
  6. B. Tadić, M. Matejić, V. Kocović, B. Novkinić, L. Brzaković, G. Simunović, D. Vukelić, Development a group fixture systems for machining centers, Journal of production engineering, Vol.19, No.1, pp. 69-74, ISSN 1821-4932, 2016. http://www.jpe.ftn.uns.ac.rs/papers/2016/no1/13-Tadic_JPE_19_No1.pdf  M52

Радови са међународних конференција
  1. Jeremić, D. Adamović, S. Mitrović, B. Bogdanović, A. Simić, S. Randjelović, P.Todorović, Influence of oxidation layer generated on preheated contact pairs on static coefficient of friction, The 13th International Conference on Tribology, Kragujevac, 2013, pp. 147-125, ISBN: 978-86-86663-98-6. http://www.serbiatrib.mfkg.rs/proceedings.pdf M33
  2. Jeremić, B. Bogdanović, A. Simić, D. Miljanić, P. Todorović, S. Randjelović, B. Tadić, Analizing the influence of the construction element position on torque transmission by friction, The 13th International Conference on Tribology, Kragujevac, 2013, pp. 341-347, ISBN: 978-86-86663-98-6. http://www.serbiatrib.mfkg.rs/proceedings.pdf M33
  3. Jeremić, M. Meyer, I. Mačuzić, B. Bogdanović, M. Jeremic, A. Simić, B. Tadić, Đ. Vukelić, Fixtures for Horizontal Machining Centers – New Projecting Approach, Journal of Manufacturing Science and Engineering (ASME), June 10-14, 2013, Madison, Wisconsin, USA. M33
  4. Jeremić, B. Bogdanović, S. Randjelović, D. Miljanić, B. Tadic, Computer numerical control simulation tool for teaching and learning of engineering students, The 8th International Quality Conference, Kragujevac, 2014. pp. 687-692, ISBN: 978-86-6335-004-5. http://www.cqm.rs/2014/cd1/pdf/papers/focus_3/078.pdf M33
  5. Matejić, M. Matejić, M. Milićević, L. Ivanović, A new concept of bicycle frame design, The Eighth International Symposium Machine and Industrial Design in Mechanical Engineering, KOD 2016, Balatonfüred, Hungary, 2016, 9-12 June, pp. 33-36, ISBN 978-86-7892-821-5 http://www.kod.ftn.uns.ac.rs/images/proceedings/kod2016.pdf M33
  1. Matejic, M. Matejic, B. Novkinic, M. Zivkovic, B. Tadic, Influence of friction on increase stiffness of modular fixture systems, The 15th International Conference on Tribology, Kragujevac, Srbija, 2017, 17-19 Maj, pp. 320-326, ISBN 978-86-6335-041-0 https://scidar.kg.ac.rs/bitstream/123456789/16797/1/2017-M33-Matejic%20-%20Rad.pdf M33
  2. Matejic, M. Matejic, L. Ivanovic, A new concept of belt grinder with improved frame rigidity, The 10th International Scientific Conference IRMES, Beograd, Srbija, pp. 218-223, ISBN 978-86-6060-119-5, 2022. https://scidar.kg.ac.rs/bitstream/123456789/16720/3/ANEWCONCEPTOFBELTGRINDERDESIGNWITHIMPROVEDFRAMERIGIDITY.pdf M33
  3. Matejic, M. Matejic, Lj. Mudric Staniskovski, I. Miletic, Implementation of mathematic model in design automation, 6th International Scientific Conference: ”Conference on Mechanical Engineering Technologies and Applications - COMETa 2022”, Jahorina, 2022, 17. 11. - 19. 11., pp. 471-478, ISBN 978-99976-947-6-8 M33
  4. Matejic, M. Matejic, J. Zivic, L. Ivanovic, Design and testing of abrasive belt grinder, 6th International Scientific Conference: ”Conference on Mechanical Engineering Technologies and Applications - COMETa 2022”, Jahorina, 2022, 17. 11. - 19. 11., pp. 527-534, ISBN 978-99976-947-6-8 M33
  5. Matejic, M., Ivanovic, L., Matejic, M. Comparative Analysis of Rotation Welding Positioners Based on Friction Forces. In: Rackov, M., Mitrović, R., Čavić, M. (eds) Machine and Industrial Design in Mechanical Engineering. KOD 2021. Mechanisms and Machine Science, vol 109. Springer, Cham. https://doi.org/10.1007/978-3-030-88465-9_54 M33
  6. Matejic, M. Matejic, J. Zivic, J. Skerlic, D. Lazarevic, M. Pantic, Тhe experimental investigation of friction occurrence in grinding process with abrasive belts, Тhe 18th International Conference on Tribology, 17 – 19 May 2023, Kragujevac, Serbia, pp. 566-572, ISBN 978-86-6335-041-0 M33
  7. M. Pantić, S. Mitrović, A. Đorđević, S. Petrović Savić, Ž. Šarkoćević, D. Lazarević, M. Matejić, Influence of different finishing techniques onto nanotribological characteristics of veneering glass ceramic, Тhe 18th International Conference on Tribology, 17 – 19 May 2023, Kragujevac, Serbia, pp. 703-710, ISBN 978-86-6335-041-0 M33

Радови са домаћих конференција
  1. Jeremić, Numerical modeling of the forming joints bodies, The 2nd Students' conference: Industrial engineering and management, Kragujevac, 2011, pp. 31-32, ISBN: 978-86-86663-70-2. http://www.cqm.rs/2011/2/pdf/20.pdf
  2. M. Jeremić, Introducing and following production of winches, The 3rd  Students' conference: Industrial engineering and management, Kragujevac, 2012, pp. 31-32, ISBN: 978-86-86663-84-9. http://www.cqm.rs/2012/cd2/3.html

Књиге и монографије

М. Матејић: Практикум из аутоматског управљања, Факултет техничких наука; Косовска Митровица, 2023. ISBN 978-86-81656-60-0, број одлуке 1125/3-11, од 5.9.2023. године.

Национални пројекти

/

Међународни пројекти
  1. CEEPUS пројекат CIII-RS-0304-07-1415-M-Technical Charactersticd Researching of Modern Product in Machine Industry (Machine Design, Fluid Technics and Calculations) with the Purpose of Improvement Their Market Characteristics and Better Placement on the Market, координатор пројекта за Факултет техничких наука Универзитета у Приштини са привременим седиштем у Косовској Митровици: др Марија Матејић, 2019 -