Књаза Милоша бр. 7, 38220 Косовска Митровица, Србија
+38128425321
office@ftn.pr.ac.rs

др Драган Лазаревић

др Драган Лазаревић

ванредни професор
+381 28 425 320
ул. Књаза Милоша бр. 7, 38220 Косовска Митровица
Катедра Катедра за производно машинство 

Стручни назив

Доктор наука - машинско инжењерство

Ужа научна област

Производно машинство и индустријски инжењеринг

Датум избора у звање

01.06.2023.

Предмети које наставник држи на основним, мастер и докторским студијама (по акредитацији из 2021. године)

 

Радови у часописима са SCI листе
  1. Lazarević, B. Nedić, S. Jović, Ž. Šarkoćević, M. Blagojević, Optical inspection of cutting parts by 3D scanning, Physica A, Vol. 531 (2019) 121583, DOI: https://doi.org/10.1016/j.physa.2019.121583. М22
  1. Jasmina Dedic, Jelena Djokic, Jovana Galjak, Gordana Milentijevic, Dragan Lazarevic, Zivče Sarkočević and Milena Lekic, An Experimental Investigation of the Environmental Risk of a Metallurgical Waste Deposit, Minerals 2022, 12, 661. https://doi.org/10.3390/min12060661. М22    
  1. Čamagić, Z. Burzić, S. Sedmak, A. Sedmak, D. Lazarević, Integrity and Life Assessment Procedure for a Reactor, Procedia Structural Integrity, Vol. 18 (2019), Pages 385–390. DOI: https://doi.org/10.1016/j.prostr.2019.08.179. М23
  2. Jović, M. Lazarević, Ž. Šarkoćević and D. Lazarević, Prediction of Laser Formed Shaped Surface Characteristics Using Computational Intelligence Techniques, Lasers in Engineering, 2018, Old City Publishing, ISSN: 0898-1507, Volume 40 (2018), Issue 4-6, Pages 239–251. DOI: https://www.oldcitypublishing.com/journals/lie-home/lie-issue-contents/lie-volume-40-number-4-6-2018/lie-40-4-6-p-239-251 М23
  3. Jović, Ž. Đorđević and D. Lazarević, Analysis of Laser Cutting Operating Cost Using Computational Intelligence, Lasers in Engineering, 2018, Old City Publishing, , ISSN: 0898-1507, Volume 40 (2018), Issue 4-6, Pages 405–409. DOI: http://www.oldcitypublishing.com/journals/lie-home/lie-issue-contents/lie-volume-40-number-4-6-2018/lie-40-4-6-p-405-409/ М23
  4. D. Lazarević, В. Nedić, Marušić, М. Mišić, Ž. Šarkoćević, Regenerating the NC code in order to improve the surface quality, Tehnicki vjesnik Vol. 24/No. 2 (2017), рр. 355-362 ISSN 1330-3651 (Print), ISSN 1848-6339 (online), DOI: https://doi.org/10.17559/TV-20161018122324. М23
  5. Jović, D. Lazarević, А. Vulović, Analyzing оfthe sensitivity оfchip jormation during machining process, Sensor Review (SR), Vol. 38, Issue 1, рр. 1-6, (2017), ISSN0260-2288, DOI: 10.l 108/SR-06-2017-0120. М23 https://www.emerald.com/insight/content/doi/10.1108/SR-06-2017-0120/full/html?skipTracking=true

Радови у часописима ван SCI листе
  1. Strahinja Ðurovic, Jelena Stanojkovic, Dragan Lazarevic, Bogdan Cirkovic, Aleksa Lazarvic, Dragan Džunic, Živce Šarkocevic, Modeling and Prediction of Surface Roughness in the End Milling Process using Multiple Regression Analysis and Artificial Neural Network, Tribology in Industry, Vol. 44, No. 3, pp. 540-549, 2022, М24  https://doi.org/10.24874/ti.1368.07.22.09.
  2. Dedić, D. Lazarević, B. Nedić, M. Mišić, Ž. Šarkoćević, Development of the mathematical model for surface topography quality determination at the end milling process, International Journal for Quality Research, Faculty of Engineering, University of Kragujevac, Serbia, vol. 11, no. 2, pp. 245 - 260, issn: 1800-6450, doi: http://ijqr.net/paper.php?id=612 , 2017. М24
  3. Simonović, D. Lazarević, M. Simonović, B. Nedić, (2020). Poređenje merenja primenom optičkih mernih sistema i koordinatne merne mašine. IMK-14 - Istraživanje i razvoj, 26(2), 35-41. https://doi.org/10.5937/IMK2002035S. М51
  4. Ž. Šarkoćević, M. Arsić, M. Mišić, Lazarević, B. Stojčetović, Korozija zaštitnih cevi, Zaštita materijala i životne sredine, Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine, pp. 103 - 107, issn: 1800-9573, udc: 620.1:502, 2014. М51
  5. S. Terzić, D. Lazarević, B. Nedić, Ž. Šarkoćević, J. Dedić, Machining contact and non-contact inspection technologies in industrial application, Journal of Production Engineering, Vol.21 (2018), Number 1, UDK 621,  ISSN 1821-4932 pp. 55-60,  Faculty Of Technical Sciences Department Of Production Engineering, Novi Sad, Serbia, http://doi.org/10.24867/JPE-2018-01-055. М52

Радови са међународних конференција
  1. Đurović, D. Lazarević, Ž. Šarkoćević, M. Blagojević, J. Stanojković, 3D printing: technology, materials, and applications in the manufacturing industry, 15th international conference on accomplishments in mechanical and industrial engineering DEMI 2021, pp 55-60, Banja Luka 28-29. may 2021. М33
  2. Jovanović, I. Čamagić, A. Sedmak, D. Lazarević, Ž. Šarkoćević, J. Stanojković, Influence of temperature on the behavior of welded alloyed steel under variable load conditions, 38th international conference on production engineering of serbia - ICPE-S 2021, 14-15. October 2021, Čačak, Serbia, ISBN: 978-86-7776-252-0. М33
  3. Đ. Strahinja, Lazarević, B. Nedić, B. Ćirković, V. Marušić, Quality of machined surface topography based on clamping error and deviation of milling teeth, 38th international conference on production engineering of serbia - ICPE-S 2021, 14-15. October 2021, Čačak, Serbia, ISBN: 978-86-7776-252-0. М33
  4. Stanojković, M. Radovanović, D. Lazarević, Ž. Šarkoćević, I. Čamagić, Effect of cutting parameters on surface roughness during end milling of al 6082-t6 using rsm, Theory to Practice as a Cognitive, Educational and Social Challenge, 17-18 September 2020, International Business College Mitrovica (IBC-M), Kosovo, Kosovska Mitrovica, pp 209-216. ISSN: 2671-3586. М33
  5. Blagojević, M. Bojović, S. Milojević, P. Marković, D. Lazarević, Modification of racing car cylinder head using 3d digitization and reverse engineering, 8th International Congress Motor Vehicles & Motors 2020 Ecology - Vehicle And Road Safety – Efficiency, October 8th - 9th, 2020, Kragujevac, Serbia. MVM2020-051, pp 191-196, ISBN: 978-86-6335-074-8. М33
  6. Stojčetović, Ž. Šarkoćević, D. Lazarević, J. Dedić, Strategies development and evaluation for sustainable energy planning in Serbia using SWOT-AHP method, XXXV Međunarodno savetovanje u organizaciji Saveza energetičara Energetika 2020: 24-27. jun 2020. godine, Zlatibor, ISBN 978-86-86199-02-7, ISSN 0354-8651, COBISS.SR-ID 15460873. М33
  7. D. Lazarević, Nedić, M. Mišić, Ž. Šarkoćević, I. Čamagić, Tačnost obrade vretenastim glodalom u funkciji širine rezanja, 42. JUPITER KONFERENCIJA, Univerzitet u Beogradu - Mašinski fakultet, 6. oktobar 2020. pp 3.88-3.93, ISBN 978-86-6060-055-6. М33
  8. Simonović, B. Nedić, M. Simonović, D. Lazarević, Comparison of optical measuring systems and CMM for smaller parts, The fifth international conference “mechanical engineering in XXI century” MASING 2020, Niš, December 09-10, 2020, pp 237-278, ISSN 2738-103X, ISBN 978-86-6055-139-1. М33
  9. Jović, Ž. Šarkoćević, D. Lazarević, B. Pejović, J. Dedić, Analysis of the effect temperature changes have on buckling of slender beams under stationary conditions, 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia, June 24-26, 2019. М33
  10. Čamagić, D. Lazarević, S. Jović, D. Kalaba, Ž. Šarkoćević, Assessment of the safety of welded joints from the aspect of the fracture mechanics application, 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia, June 24-26, 2019. М33
  11. Lazarević, B. Nedić, Ž. Šarkoćević, I. Čamagić, J. Dedić, Methods of integrating modern measuring devices on machining sistems, 14th international conference on accomplishments, DEMI 2019, pp 105-112, Banja Luka, 24 - 25 May, 2019. ISBN: 978-99938-39-85-9, COBISS.RS-ID 8146456. М33
  12. Ž. Šarkoćević, Lazarević, I. Čamagić, M. Radojković, B. Stojčetović, The pipeline defect assessment manual – short review, XXI YuCorr, Serbian society of corrosion and materials protection, Tara Mountain, Serbia, 17-20 September, 2019, pp. 161-166. ISBN 978-86-82343-27-1. М33
  13. Lazarević, B. Nedić, Ž. Šarkoćević, I. Čamagić, J. Dedić, The development of optical systems for on-machine inspection of parts made with machining process, Conference on Mechanical Engineering Technologies and Applications” COMETa2018, pp. 203-210, ISBN 978-99976-719-4-3, COBISS.RS-ID 7818520, East Sarajevo – Jahorina, 27-30 November, 2018. М33
  14. Stojčetović, Ž. Šarkoćević, D. Lazarević, A. Đorđević, B. Prlinčević, Renewable energy sources for improvement of electricity quality supply in štrpce municipality, Proceedings: 3st International conference on Quality of Life, Center for Quality, Faculty of Engineering, University of Kragujevac, pp. 201 - 204, isbn: 978-86-6335-056-4, 28-30 November 2018, Kopaonik, Serbia. М33
  15. Lazarević, B. Nedić, M. Radenković, Ž. Šarkoćević, B. Stojčetović, Primena optičkih beskontaktnih mernih sistema kod inspekcije delova dobijenih obradom rezanjem, Proceedings: 37th International Conference on Production Engineering Of Serbia - ICPE-S 2018, pp. 165 - 172, isbn: 978-86-6335-057-1, 25-26 October 2018, Kragujevac, Serbia. М33
  16. Ž. Šarkoćević, B. Stojčetović, S. Jović, Lazarević, Corrosion processes in the oil and gas industry and methods for their mitigation, XIX yucorr International conference, Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection, Tara, 12-15. Sep, 2017. М33
  17. Lazarević, B. Nedić, M. Mišić, Ž. Šarkoćević, Inspection technologies and devices in industrial aplication, Proceedings: 1st International conference on Quality of Life, Center for Quality, Faculty of Engineering, University of Kragujevac, pp. 331-338, issn: 978-86-6335-033-5, Srbija, 9. - 10. Jun, 2016. М33
  18. D. Lazarević, B. Nedić, Measurement technologies and machining errors, 12th International Scientific Conference - MMA 2015, University of Novi Sad, Faculty of Technical Sciences, pp. 47-50, ISBN 978-86-7892-722-5, Serbia, 25-26. Sep, 2015. М33
  19. Lazarević, B. Nedić, M. Radovanović, 5-Axis machine tools, configurations, accuracy and model of geometric errors, The 3rd International Conference Mechanical Engineering in XXI Century, University of Niš, Faculty of Mechanical Engineering, pp. 363-366, ISBN 978-86-6055-072-1, Serbia, 17-18. Sep, 2015. М33
  20. Lazarević, M. Mišić, Ž. Šarkoćević, Z. Lekić, B. Stojčetović, Specification of geometric tolerances, review the recent development. Proceedings: 9th International Quality Conference, Center for Quality, Faculty of Engineering, University of Kragujevac, pp. 317-324, issn: 978-86-6335-015- 1, Srbija, 5. Jun, 2015. М33
  21. Lazarević, M. Mišić, Ž. Šarkoćević, Z. Lekić, B. Stojčetović, Computer-aided inspection planning systems for OMI and CMMs, Proceedings: 9th International Quality Conference, Center for Quality, Faculty of Engineering, University of Kragujevac, pp. 311-316, issn: 978-86-6335-015-1, Srbija, 5. Jun, 2015. М33
  22. Stojčetović, Ž. Šarkoćević, D. Lazarević, D. Marjanović, Application of the pareto analysis in project management, Proceedings: 9th International Quality Conference, Center for Quality, Faculty of Engineering, University of Kragujevac, pp. 655-658, issn: 978-86-6335-015-1, Srbija, 5. Jun, 2015.М33
  23. Lazarević, M. Mišić, B. Stojčetović, Computation analysis with curved shapes, Proceedings: 8th International Quality Conference, Center for Quality, Faculty of Engineering. University of Kragujevac, pp. 675-686, issn: 978-86-6335-004-5, Srbija, 23. May, 2014. М33
  24. Lazarević, M. Mišić, B. Stojčetović, 3D mesh segmentation for CAD applications, Proceedings: 8th International Quality Conference, Center for Quality, Faculty of Engineering. University of Kragujevac, pp. 616-630, issn: 978-86-6335-004-5, Srbija, 23. May, 2014. М33
  25. Lazarević, M. Mišić B. Ćirković, Image segmentation as a classification task in computer applications, Proceedings: 8th International Quality Conference, Center for Quality, Faculty of Engineering, University of Kragujevac, pp. 803-816, issn: 978-86-6335-004-5, Srbija, 23. May. 2014. М33
  26. Stojčetović, M. Mišić, Ž. Šarkočević, D. Lazarević, D. Zubac, Managing of risks and quality in projects, Proceedings: 8th International Quality Conference. Center for Quality, Faculty of Engineering. University of Kragujevac, pp. 51-58, issn: 978-86-6335-004-5, Srbija, 23. May, 2014. М33
  27. Stojcetović, D. Lazarević, B. Prlinčević, D. Stajčić, S. Miletić, Project management: cost, time and quality, Proceedings: 8th International Quality Conference, Center for Quality, Faculty of Engineering. University of Kragujevac, pp. 345-350, issn: 978-86-6335-004-5, Srbija, 23. May, 2014. М33
  28. Stojčetović, V. Velinov, D. Lazarević, Energy sector in Serbia - coal and renewables, Proceedings: The 46th International October Conference on Mining and Metallurgy, University of Belgrade, Tehnical Faculty in Bor and Mining and Metallurgy Institute Bor, pp. 445-448, issn: 978-86- 6305-026-6, Srbija, 1-4. Oct, 2014. М33
  29. Lazarević, M. Erić, M. Mišić, The development of digital factory in today's world, Proceedings: 7th International Quality Conference, Center for Quality, Faculty of Engineering. University of Kragujevac, pp. 165-180, issn: 978-86-86663-94-8, Srbija, 24. May, 2013. М33
  30. Ž. Šarkoćević, M. Arsić, S. Jović, D. Lazarević, Methods of reliability assessment of damaged pipeline corrosio, Symposium Nonlinear Dynamics – Milutin Milanković, Multidisciplinary and Interdisciplinary Applications (SNDMIA 2012), (Eigth Serbian Symposium in area of Non-linear Sciences), ISBN 978-86-7746-344-1 (COBISS.SR – ID 193221132), Editors: Katica R. (Stevanović) HEDRIH, Žarko Mijajlović, Belgrade, October 1-5, 2012. М33

Радови са домаћих конференција
  1. Lazarević, M. Mišić, B. Ćirković, Postojeće tehnike za segmentaciju slike. Zbornik: 41 nacionalna konferencija o kvalitetu, Fakultet inženjerskih nauka Univerziteta u Kragujevcu, Centar za kvalitet, pp. 26-1 - 26-11, issn: 978-86-6335-004-5, Srbija, 22-23. May, 2014. М60
  2. D. Lazarević, M. Erić, M. Mišić, Modeli, projektovanje i prednosti digitalne fabrike, Zbornik: 40. nacionalna konferencija o kvalitetu, Fakultet inženjerskih nauka Univerziteta u Kragujevcu, Centar za kvalitet, pp. A-240 - A-248, issn: 978-86-86663-94-8, Srbija, 23-25. May, 2013. М60

Књиге и монографије
  1. Д. Лазаревић, Б. Пејовић, Ж. Шаркоћевић: Процеси обраде резањем – збирка задатака, Факултет техничких наука; Косовска Митровица, 2023. ISBN 978-86-81656-42-6, бр. одлуке 14/3-13 од 11.01.2023. године

Национални пројекти

 

Међународни пројекти

 

 

E-mail


E-сервиси



Основни подаци


Адреса: Књаза Милоша, бр. 7, 38220, Косовска Митровица

Тел: +381 (28) 425-321

Факс: +381 (28) 425-322

e-mail: office@ftn.pr.ac.rs

ПИБ: 101981837

Текући рачун: 840-1493666-45

© 2024 ФТНКМ. Developed by Милић & Марковић.